• Auto Towing Truck Slide Carriers

    Auto Towing Truck Slide Carriers

    Take the popular CSCWRECKER Auto Towing Truck over-the-cab carrier deck to complete the perfect package for your new rollback tow truck whether it's for single or multi-vehicle transport. Roll back carriers are well suited for a wide range of applications that require operational ease with high-volume payload capacity. you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf

    Detail>>
  • Steel Deck Rollback Carrier

    5 Ton Steel Deck Rollback Carrier

    5P2 Load Rating:5Ton Deck Length:6.33m Lift Capacity:2Ton Winch:4Ton Tow Capacity:5Ton

    Detail>>
  • 16Ton Integrated Wrecker Body for MACK Truck Chassis

    16Ton Integrated Wrecker Body for MACK Truck Chassis

    Integrated wrecker body is our SKD rotator assembling. This integraged wrecker customized body is offering for oversea buyer fitted on their on truck chassis. At CSCWRECKER, we tend to overdo things and this series is the best example. The super structurer would deliveried by semi knocked down loading with one pcs of 40HQ container and shipping  to any port in the world.Together with the superstructurer deliveried with a installation guidelines easy for your equippments assembling,one year free spareparts for such rotator towing bodies

    Detail>>
  • 70Ton Rotator Body for Kenworth K500 8x4 Truck Chassis

    70Ton Rotator Body for Kenworth K500 8x4 Truck Chassis

    Rotator body is our SKD rotator towing assembling. This rotators customized body is offering for your oversea buyer fitted on their on truck chassis. At CSCWRECKER, we tend to overdo things and this series is the best example. The super structurer would deliveried by semi knocked down loading with one pcs of 40HQ container and shipping  to any port in the world.Together with the superstructurer deliveried with a installation guidelines easy for your equippments assembling,one year free spareparts for such rotator towing bodies

    Detail>>
  • Car Towing Service Auto Towing Truck

    Car Towing Service Auto Towing Truck

    Car and Light Truck Towing, Flatbed Towing, Police Towing, Light Duty Towing, Emergency Towing, Show Car Hauling, Motorcycle Towing, Accident Towing & Recovery, Car Loading and Car Winching and Rollover.

    Detail>>
Products
Car Carriers functionally cataloged with three types as Rollback Carriers, Dropdeck Carriers and Crane Carriers. Also named as flatbed wrecker truck which suitable for carrying all cars, light-trucks and equipment. Our Car Carriers are a perfect case-in-point.They possess every standard feature that you would expect from a World Leader, brought together in a sleek, attractive and durable package. With an independent wheel lift system, positive lock down, extra-low loading angle, and easy one-man operation.
  • Side Mount Winch Crane Tow Truck Side Mount Winch Crane Tow Truck Guaranteed 100% Crane tow truck Manufacturers,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Crane Steel Checkered Plate Deck Tow Truck Crane Steel Checkered Plate Deck Tow Truck Top Quality Crane tow truck Suppliers  ,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Center Mount Worm Gear Winch Crane Tow Truck Center Mount Worm Gear Winch Crane Tow Truck Perfect Cheap Crane tow truck for Sale ,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • 8,000 Lbs Worm Gear Winch Crane Rollback Carriers 8,000 Lbs Worm Gear Winch Crane Rollback Carriers Crane Rollback Carriers ,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Tow Truck Carrying with Crane Transport Light Duty Equipment Tow Truck Carrying with Crane Transport Light Duty Equipment Tow Truck carrying with Crane ,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • 8 Degree Flipper Tail Crane Truck Rollback 8 Degree Flipper Tail Crane Truck Rollback Crane Truck Rollback ,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Strong 3.6 Ton Deck Tow Truck Carrying with Crane Strong 3.6 Ton Deck Tow Truck Carrying with Crane Tow Truck carrying with Crane ,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Steel Checkered Plate Deck Rollback Truck Crane Steel Checkered Plate Deck Rollback Truck Crane Crane towing truck ,crane wrecker is flat bed wrecker mounted with crane lifting 3300ton towing 5tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  5tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • FOTON Crane Tow Truck Carrying Light Duty Equipment FOTON Crane Tow Truck Carrying Light Duty Equipment FOTON Crane towing truck ,crane wrecker is flat bed wrecker mounted with crane lifting 2100ton towing 3tons BRIEF INTRODUCE: CSCWRECKER as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment.  The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons. The wrecker towing truck with crane is platform wrecker tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton. DETAILED SPECIFICATION: Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of brokent car light duty trucks. Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes. Wrecker     Underlift-Max lifting : 3300 kg Underlift-Max Lifting : 2750 kg at all extend Underlift Extend Length : 2700 mm Length of Flatbed : 6200 mm Width of Flatbed : 2350 mm Flatbed Carry Weight : 7200 kg Flatbed Title Out : 2700 mm Min. Title Angle : 12 degree Heigth from Ground to Flatbed : 1230 mm Winch Qty : 1 pcs Winch Type : Hydraulic Diameter of Winch : ¢110 mm Cable Loading Rate : 40 KN Cable Length : 21~28 m Cable Diameter, : ¢11 mm Min. Ground Clearance : ≥215 mm Max. Gradeability : 28% Crane   S3SK2Q Max Lifting Capacity : 3300 kg Max Lifting Moment : 4.2 t.m Recommend Power : 9 kw Max Oil Flow of Hydraulic Sys. : 20 l/min Oil Tank Capacity : 25 liters Crane Weight : 818 kg Installation Space : 850 mm Rotation Angle : 360 degree all rotation MEASUREMENT     Wheelbase : 4700 mm Length : 7550 mm Width : 2500 mm Height : 2900 mm Front Overhang : 1430 mm Rear Overhang : 1420 mm WEIGHT     Gross Vehicle Weight(G.V.W) : 12495 kg Vehicle(Curb) Weight : 8000 kg Flat bed system  Flatbed wrecker system design, the such drawing our engineer one day should drawing thousands of ..... Knuckle boom crane optional for the crane wrecker truck CHASSIS PARAMETERS: ENGINE     Model : B170 33 (DONGFENG CUMMINS) Type : Vertical ,in line ; Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine Fuel Injection : Direct injection. Horsepower : 170hp(125kw)@2500rpm Torque : 560(N.m)/ 1300 (rpm) Displacement : 5.9L / 4 cylinders Emission Standard : Euro 3 Fuel Tank Capacity : 150liters CAB& ACCESSORIES     Structurer : Day cab-steel cabin , Hardtop,60° tiltable Cabin : 3 seats, with seat belts Instrumentation : i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer ii.Engine Coolant temperature gauge iii.Battery charging indicator iv.Parking brake light ,Reversing alarm v.Filters and fuel-water separator service indicators vi.Speedometer and Odometer vii. A/C,CD,Radio ; Cigar Lighter CLUTCH     Type : Push type, dry single plate; hydraulic actuation Disc : Φ395mm TRANSMISSION     Gearbox Model : DF6S750(7.455) Type   Floor-mounted, manual shift gear lever Torque of Gearbox : 430 N.m Speed : 6+1 Max. Geared Speed : 110km/h Power Take Off : Manufacturer's standard PTO box is provided Wheel Drive : Rear two wheels drive with 4×2 wheel formula CHASSIS FRAME     Structuer : Electrophoresis ; double all steel constructed frame to be reinforced with cross members. Frame Sectional Modulus : 250×80×(7+4) mm STEERING BOX     Type : Hydraulic power assistance steering Drive Mode : Left hand steering control SUSPENSION     Front : Double acting telescopic shock absorbers ,8pcs spring Rear : Second stage helper spring,6+5 pcs AXLES     Rear Axle Rating : 6,650kg; Hub reduction floating rear axle Front Axle Rating : 3,350kg; Rigid I beam BRAKES     Parking : Mechanical release parking brakes Engine : Foot-operated engine brake Service : Power assisted hydraulic actuation service brakes all four wheels WHEELS     Quantity : 6+1spare Tire Size : 9.00-20, (ALL WHEELS) Ply Rating : 14PR Crane wrecker truck rear view  3tons flatbed wrecker truck mounted with crane side view TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees”Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person tocontract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, HongKong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300)Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
Copyright © CSCTRUCK LIMITED. All Rights Reserved.
Chat Now

klein-ahrSkype1