• Auto Towing Truck Slide Carriers

    Auto Towing Truck Slide Carriers

    Take the popular CSCWRECKER Auto Towing Truck over-the-cab carrier deck to complete the perfect package for your new rollback tow truck whether it's for single or multi-vehicle transport. Roll back carriers are well suited for a wide range of applications that require operational ease with high-volume payload capacity. you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf

    Detail>>
  • Steel Deck Rollback Carrier

    5 Ton Steel Deck Rollback Carrier

    5P2 Load Rating:5Ton Deck Length:6.33m Lift Capacity:2Ton Winch:4Ton Tow Capacity:5Ton

    Detail>>
  • 16Ton Integrated Wrecker Body for MACK Truck Chassis

    16Ton Integrated Wrecker Body for MACK Truck Chassis

    Integrated wrecker body is our SKD rotator assembling. This integraged wrecker customized body is offering for oversea buyer fitted on their on truck chassis. At CSCWRECKER, we tend to overdo things and this series is the best example. The super structurer would deliveried by semi knocked down loading with one pcs of 40HQ container and shipping  to any port in the world.Together with the superstructurer deliveried with a installation guidelines easy for your equippments assembling,one year free spareparts for such rotator towing bodies

    Detail>>
  • 70Ton Rotator Body for Kenworth K500 8x4 Truck Chassis

    70Ton Rotator Body for Kenworth K500 8x4 Truck Chassis

    Rotator body is our SKD rotator towing assembling. This rotators customized body is offering for your oversea buyer fitted on their on truck chassis. At CSCWRECKER, we tend to overdo things and this series is the best example. The super structurer would deliveried by semi knocked down loading with one pcs of 40HQ container and shipping  to any port in the world.Together with the superstructurer deliveried with a installation guidelines easy for your equippments assembling,one year free spareparts for such rotator towing bodies

    Detail>>
  • Car Towing Service Auto Towing Truck

    Car Towing Service Auto Towing Truck

    Car and Light Truck Towing, Flatbed Towing, Police Towing, Light Duty Towing, Emergency Towing, Show Car Hauling, Motorcycle Towing, Accident Towing & Recovery, Car Loading and Car Winching and Rollover.

    Detail>>
Products
RTR series is our rotators. Our rotators are extremely strong. At CSCWRECKER, we tend to overdo things and this series is the best example. Our rotators use massive booms and thick cylinders. Our large safety margins will allow you to work in security and complete confidence in your equipment. Our RTR-70 is the recovery king. It turns heads no matter where you go. 
  • Front and Rear Four Stage Hydraulic Rotator Recovery Truck Front and Rear Four Stage Hydraulic Rotator Recovery Truck Best Rotator Recovery Truck Buyers  towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Rotator Recovery Towing Wrecker Truck Rotator Recovery Towing Wrecker Truck Best Rotator Recovery Truck Sellers towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Heavy Duty Rotator Car Towing Service Truck Heavy Duty Rotator Car Towing Service Truck Heavy Duty Rotator Towing Truck for Sale towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Rotator Rear Anchors Towing Truck Rotator Rear Anchors Towing Truck The Place to Buy Rotator Towing Truck from China towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Thirty-Five-Ton Rotator Towing Truck Thirty-Five-Ton Rotator Towing Truck Supplier of Quality Rotator Towing Truck  from China towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Integrated Wheel Boom Lift Rotator Towing Truck Integrated Wheel Boom Lift Rotator Towing Truck Sourcing Rotator Towing Truck Leading Seller from China towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Rotator Towing Recovery Jobs Truck Rotator Towing Recovery Jobs Truck Search For Rotator Towing Truck Leading Seller from China towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service
  • Wireless Controls Rotator Towing Truck Wireless Controls Rotator Towing Truck Choosing the best Rotator Towing Truck from China towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Rotator Two Stage Boom Towing Truck Rotator Two Stage Boom Towing Truck Purchase Of Rotator Towing Truck from China towing capacity 60tons best choose for your truck repair business BRIEF INTRODUCE:RTR-60 Rotator Towing Truck CSCWRECKER RTR series rotator tow truck ranged from 15ton-70ton, is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus. As with all CSCWRECKER Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.  *Two 66,000lbs and two 35,000lbs planetary winches  *Three stage boom  *Independent 100,000 lbs under lift  *4 sets of frame forks *Dual manual controls  *Complete wireless controls (English Lanuguage is optional) *Hydraulic proportioning valves  *Bus bars  *Euro bars  *Tail board wire controls *Four stage boom  *Front and rear four stage hydraulic out-riggers  *Aluminum body  *Aluminum or stainless steel dress-uppackage  *Custom body configurations  *Custom wheel base configurations  *Custom tool box configurations  SLIDING ROTATOR OPTION  All three of our rotators are available in a sliding configuration with a 96  ROTATOR SYSTEM INFORMATION:RTR-60 Ratator Towing Truck Underlift-Max Lifting at all extended,kg 4,500 Underlift-Max lifting,kg 16,000 Length of Arm,mm 4500 In/Out Length,mm 3696 Tiltle Angle,° -5 Moving Angle,° <95 Boom-Max Lifting,kg 30000 Boom-Lifting at all extend,kg 4500 Length of 1st Boom ,mm 5200 Total length of Booms,mm 8400 Height of Lifing,mm 12300 Move Angle,° ≦60 Rotator ,° 360 Winch Qty,pcs 2 Length of Cable,mm ¢20 Front Legs Span,mm 5490 RearLegs Span,mm 4387 Front to Rear Distance,mm 8265 DETAILED PARAMETERS:RTR-60 Ratator Towing Truck Engine WP10.290E32 Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw/rpm 213 / 2200 Max Torque,N.m/rpm 1200 Displacement,ml 9726 Emission Standard Euro 3 Transmission 9JS135(FAST) Speed No.s 9 Forward and 1 Reverse Speed Max Output Torque,N.m 1350 Max Output Speed,rpm 2600 Input Power,hp 243 Oilling,liters 12.5 Gearshift Manual (Mechanical) Clutch GFX420 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle BENZ  Front Axle Mercedes Benz Technology  Front Axle Capacity,kg 6500 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Mercedes Benz Technology Middle&Rear Axle Capacity,kg 6500/18000 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Rear Axle Ratio 5.921 Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  TAS85(ZF) Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Input Toque,Nm 5890 Output Torque,Nm 90 Rocker shaft swing angle,degree 1:160 Angle Ratio 23.27  Cabin NG80 Type Forward control, all steel welded construction, long cab, inner A/C, one bed Seat Nos 3 Bunk No.s 1 Wiper No.s 2 Tires 12.00R20 Tire No.s 12+1 spare tire Type Radius tires Rims 8.5-20 Rim No.s 12+1 spare tire Type All steel dicasting Electrical 24V Battery Voltage,V 2X12 Battery Ampere,Ah 135 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 400 MORE PHOTOS:RTR-60 Ratator Towing Truck Towing test in our factory parking aera.(The be towed truck is 10*6 HOWO heavy duty wrecker truck capacity 70tons) Lifting test in our factory (the left truck chasis curb weight 8450kg, rotator tow truck booms fully extended) Underlift for lifting axles Side view for the wrecker truck which ready for delivery to shanghai port (the buyer who from a Truck repair service company in Africa) Rear view for the rotator tow truck (the curb weight for such RTR-60 wrecker truck is 37750kg, before you ordering the truck should be confirm with the register company max curb weight be allowed in your country road) Legs testing and boom extending test ,hydraulic testing process  The RTR-60 rotator towing truck be deliveried by a 40feet fraq container If you need to know more about us please kindly send us an email to info@csctrucks.com TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.   AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
Chat Now

klein-ahrSkype1