• Auto Towing Truck Slide Carriers

    Auto Towing Truck Slide Carriers

    Take the popular CSCWRECKER Auto Towing Truck over-the-cab carrier deck to complete the perfect package for your new rollback tow truck whether it's for single or multi-vehicle transport. Roll back carriers are well suited for a wide range of applications that require operational ease with high-volume payload capacity. you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf you can carry a lot more than the usual 2 ton trucks - See more at: http://www.metrotowtrucks.com/Carriers/FB-5.aspx#sthash.F0beRi3Q.dpuf

    Detail>>
  • Steel Deck Rollback Carrier

    5 Ton Steel Deck Rollback Carrier

    5P2 Load Rating:5Ton Deck Length:6.33m Lift Capacity:2Ton Winch:4Ton Tow Capacity:5Ton

    Detail>>
  • 16Ton Integrated Wrecker Body for MACK Truck Chassis

    16Ton Integrated Wrecker Body for MACK Truck Chassis

    Integrated wrecker body is our SKD rotator assembling. This integraged wrecker customized body is offering for oversea buyer fitted on their on truck chassis. At CSCWRECKER, we tend to overdo things and this series is the best example. The super structurer would deliveried by semi knocked down loading with one pcs of 40HQ container and shipping  to any port in the world.Together with the superstructurer deliveried with a installation guidelines easy for your equippments assembling,one year free spareparts for such rotator towing bodies

    Detail>>
  • 70Ton Rotator Body for Kenworth K500 8x4 Truck Chassis

    70Ton Rotator Body for Kenworth K500 8x4 Truck Chassis

    Rotator body is our SKD rotator towing assembling. This rotators customized body is offering for your oversea buyer fitted on their on truck chassis. At CSCWRECKER, we tend to overdo things and this series is the best example. The super structurer would deliveried by semi knocked down loading with one pcs of 40HQ container and shipping  to any port in the world.Together with the superstructurer deliveried with a installation guidelines easy for your equippments assembling,one year free spareparts for such rotator towing bodies

    Detail>>
  • Car Towing Service Auto Towing Truck

    Car Towing Service Auto Towing Truck

    Car and Light Truck Towing, Flatbed Towing, Police Towing, Light Duty Towing, Emergency Towing, Show Car Hauling, Motorcycle Towing, Accident Towing & Recovery, Car Loading and Car Winching and Rollover.

    Detail>>
Products
The integrated wreckers short as INT series is our integrated line of tow trucks commonly called wreckers. We have a wide range of products with 3 different types as light-duty, medium-duty and heavy-duty ranging for the smallest 3 tons to the massive 60 tons with a 3 stage boom. We are certain that we make a wrecker that suits you. With a massive amount of options available for each model, you can make sure you get the truck you want.
  • 5.4 ton (12,000 lbs) Winch Integrated Wrecker 5.4 ton (12,000 lbs) Winch Integrated Wrecker Road Rescue Wrecker towing capacity 12000kg short as INT-12 Integrated Wrecker with very cheap price for sale NOW.Just join us as a dealer open your truck business BRIEF INTRODUCE: INT Medium duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Drive Mode 6×4 N.V.W,kg 25000 Tare Weight,kg 12050 Engine WEICHAI   375 ps Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Emission Standard Euro 4 Speed No.s 9 Forward and 1 Reverse Speed;Manual (Mechanical) Sterring  Left hand drive or right hand drive optional Cabin Forward control, all steel welded construction, long cab, inner A/C, one bed Tires 12.00R20;12+1 spare tire;Radius tires Electrical 24V Front view for 40tons Heavy haul Integrated truck carriers wrecker  .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Side view for the  12tons Heavy haul Integrated truck carriers wrecker  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met. AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope
  • 4.5 Ton (10,000 Lbs) Winch Integrated Wrecker 4.5 Ton (10,000 Lbs) Winch Integrated Wrecker Road Rescue Wrecker towing capacity 12000kg short as INT-12 Integrated Wrecker with very cheap price for sale NOW.Just join us as a dealer open your truck business BRIEF INTRODUCE: INT Medium duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Drive Mode 6×4 N.V.W,kg 25000 Tare Weight,kg 12050 Engine WEICHAI   375 ps Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Emission Standard Euro 4 Speed No.s 9 Forward and 1 Reverse Speed;Manual (Mechanical) Sterring  Left hand drive or right hand drive optional Cabin Forward control, all steel welded construction, long cab, inner A/C, one bed Tires 12.00R20;12+1 spare tire;Radius tires Electrical 24V Front view for 40tons Heavy haul Integrated truck carriers wrecker  .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Side view for the  12tons Heavy haul Integrated truck carriers wrecker  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met. AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope
  • 8,000 Lbs Worm Gear Winch Integrated Wrecker 8,000 Lbs Worm Gear Winch Integrated Wrecker Road Rescue Wrecker towing capacity 12000kg short as INT-12 Integrated Wrecker with very cheap price for sale NOW.Just join us as a dealer open your truck business BRIEF INTRODUCE: INT Medium duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Drive Mode 6×4 N.V.W,kg 25000 Tare Weight,kg 12050 Engine WEICHAI   375 ps Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Emission Standard Euro 4 Speed No.s 9 Forward and 1 Reverse Speed;Manual (Mechanical) Sterring  Left hand drive or right hand drive optional Cabin Forward control, all steel welded construction, long cab, inner A/C, one bed Tires 12.00R20;12+1 spare tire;Radius tires Electrical 24V Front view for 40tons Heavy haul Integrated truck carriers wrecker  .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Side view for the  12tons Heavy haul Integrated truck carriers wrecker  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met. AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope
  • Integrated Wrecker Checkered Plate Deck Integrated Wrecker Checkered Plate Deck Road Rescue Wrecker towing capacity 12000kg short as INT-12 Integrated Wrecker with very cheap price for sale NOW.Just join us as a dealer open your truck business BRIEF INTRODUCE: INT Medium duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Drive Mode 6×4 N.V.W,kg 25000 Tare Weight,kg 12050 Engine WEICHAI   375 ps Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Emission Standard Euro 4 Speed No.s 9 Forward and 1 Reverse Speed;Manual (Mechanical) Sterring  Left hand drive or right hand drive optional Cabin Forward control, all steel welded construction, long cab, inner A/C, one bed Tires 12.00R20;12+1 spare tire;Radius tires Electrical 24V Front view for 40tons Heavy haul Integrated truck carriers wrecker  .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Rear view for 12tons Heavy haul Integrated truck carriers wrecker  Side view for the  12tons Heavy haul Integrated truck carriers wrecker  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met. AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope
  • High Performance Economy Integrated Wrecker High Performance Economy Integrated Wrecker Right hand drive integrated tow truck towing 5000kg for sale from China famous brand wrecker manufactuer BRIEF INTRODUCE: INT Light duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Engine CY4102-C3C Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw(hp)/rpm 88(120)/ 2200 Max Torque,N.m/rpm 280 Displacement,ml 3856 Emission Standard Euro 3 Transmission   Speed No.s 5 Forward and 1 Reverse Speed Max Output Torque,N.m 568 Gearshift Manual (Mechanical) Clutch ¢430 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle DENA Front Axle Capacity,kg 3200 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Capacity,kg 4290 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Frame 216*70*6+3mm Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  Integral Hydraulic Power Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Cabin   Type Forward control, all steel welded construction,short cab, inner A/C,Radio,Cassette, tiltable Seat Nos 2 Bunk No.s 0 Wiper No.s 2 Tires 8.25R20 Tire No.s 6+1 spare tire Type Radius tires Ply, 16PR Rims 8.25R16 Rim No.s 6+1 spare tire Type All steel dicasting Electrical 12V Battery Voltage,V 12 Battery Ampere,Ah 145 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 200 Front view for 2tons integrated wrecker ,the wrecker could be loaded with one unit 20GP container that could less a lot of shipping cost for the sea freight charges,finally lower your purchase cost for such wrecker truck .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Front 45 angle view ,light duty design for carry passenger cars.   Side view for the light duty integrated wrecker truck  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • High Performance Integrated Wrecker Steel Deck High Performance Integrated Wrecker Steel Deck Right hand drive integrated tow truck towing 5000kg for sale from China famous brand wrecker manufactuer BRIEF INTRODUCE: INT Light duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Engine CY4102-C3C Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw(hp)/rpm 88(120)/ 2200 Max Torque,N.m/rpm 280 Displacement,ml 3856 Emission Standard Euro 3 Transmission   Speed No.s 5 Forward and 1 Reverse Speed Max Output Torque,N.m 568 Gearshift Manual (Mechanical) Clutch ¢430 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle DENA Front Axle Capacity,kg 3200 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Capacity,kg 4290 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Frame 216*70*6+3mm Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  Integral Hydraulic Power Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Cabin   Type Forward control, all steel welded construction,short cab, inner A/C,Radio,Cassette, tiltable Seat Nos 2 Bunk No.s 0 Wiper No.s 2 Tires 8.25R20 Tire No.s 6+1 spare tire Type Radius tires Ply, 16PR Rims 8.25R16 Rim No.s 6+1 spare tire Type All steel dicasting Electrical 12V Battery Voltage,V 12 Battery Ampere,Ah 145 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 200 Front view for 2tons integrated wrecker ,the wrecker could be loaded with one unit 20GP container that could less a lot of shipping cost for the sea freight charges,finally lower your purchase cost for such wrecker truck .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Front 45 angle view ,light duty design for carry passenger cars.   Side view for the light duty integrated wrecker truck  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Top Quality Integrated Wrecker Single Deck Top Quality Integrated Wrecker Single Deck Right hand drive integrated tow truck towing 5000kg for sale from China famous brand wrecker manufactuer BRIEF INTRODUCE: INT Light duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Engine CY4102-C3C Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw(hp)/rpm 88(120)/ 2200 Max Torque,N.m/rpm 280 Displacement,ml 3856 Emission Standard Euro 3 Transmission   Speed No.s 5 Forward and 1 Reverse Speed Max Output Torque,N.m 568 Gearshift Manual (Mechanical) Clutch ¢430 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle DENA Front Axle Capacity,kg 3200 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Capacity,kg 4290 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Frame 216*70*6+3mm Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  Integral Hydraulic Power Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Cabin   Type Forward control, all steel welded construction,short cab, inner A/C,Radio,Cassette, tiltable Seat Nos 2 Bunk No.s 0 Wiper No.s 2 Tires 8.25R20 Tire No.s 6+1 spare tire Type Radius tires Ply, 16PR Rims 8.25R16 Rim No.s 6+1 spare tire Type All steel dicasting Electrical 12V Battery Voltage,V 12 Battery Ampere,Ah 145 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 200 Front view for 2tons integrated wrecker ,the wrecker could be loaded with one unit 20GP container that could less a lot of shipping cost for the sea freight charges,finally lower your purchase cost for such wrecker truck .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Front 45 angle view ,light duty design for carry passenger cars.   Side view for the light duty integrated wrecker truck  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • Top Quality Integrated Wrecker Two Stage Boom Top Quality Integrated Wrecker Two Stage Boom Right hand drive integrated tow truck towing 5000kg for sale from China famous brand wrecker manufactuer BRIEF INTRODUCE: INT Light duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Engine CY4102-C3C Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw(hp)/rpm 88(120)/ 2200 Max Torque,N.m/rpm 280 Displacement,ml 3856 Emission Standard Euro 3 Transmission   Speed No.s 5 Forward and 1 Reverse Speed Max Output Torque,N.m 568 Gearshift Manual (Mechanical) Clutch ¢430 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle DENA Front Axle Capacity,kg 3200 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Capacity,kg 4290 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Frame 216*70*6+3mm Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  Integral Hydraulic Power Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Cabin   Type Forward control, all steel welded construction,short cab, inner A/C,Radio,Cassette, tiltable Seat Nos 2 Bunk No.s 0 Wiper No.s 2 Tires 8.25R20 Tire No.s 6+1 spare tire Type Radius tires Ply, 16PR Rims 8.25R16 Rim No.s 6+1 spare tire Type All steel dicasting Electrical 12V Battery Voltage,V 12 Battery Ampere,Ah 145 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 200 Front view for 2tons integrated wrecker ,the wrecker could be loaded with one unit 20GP container that could less a lot of shipping cost for the sea freight charges,finally lower your purchase cost for such wrecker truck .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Front 45 angle view ,light duty design for carry passenger cars.   Side view for the light duty integrated wrecker truck  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
  • High Quality Durability Integrated Wrecker High Quality Durability Integrated Wrecker Right hand drive integrated tow truck towing 5000kg for sale from China famous brand wrecker manufactuer BRIEF INTRODUCE: INT Light duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today.  *Steel body with checkered plate deck  *Single stage boom and wheel lift with swivel scoop pans  *Single 8,000 lbs worm gear winch  * Two units main lifting cyliders *50 feet of 3/8 wire rope *Manual spring tensioner  *Two sets of frame forks  *Frame fork adapters  *Dual manual controls  *Weather stripping on all tool box doors  *Light pylon OPTIONS: *Single door24" or double door 48" tunnel tool box(es) *Twin line wiches  *Cab-over tunnel tool box  *Custom paint and graphics *Aluminum dress up kit *Wired controls  *Complete wireless controls  *In-cab controls  *Aluminum body *84" CA custom body *Full installation services  *Additional frame forks  *Custom attachments  *Extended warranty  BOOM PARAMETERS: Boom Rating on first stage,kg 3,628 Boom Elevation maximum,degrees  24 Winch worm gear, optional Twin Line,kg 3,628 Wheel Lift Rating @ Full Extension,kg 1815 Tow Rating,kg 3175 Cross Bar Size,mm 102x 89 Tilt Angles,degrees +12 ~ -11  Reach Past Tailboard,mm 1090 Maximum Reach Past Tailboard,mm 1575 Wire Rope Length,m 15.2 Wire Rope Dia,inch 3/8 CHASSIS INFORMATION: Engine CY4102-C3C Type Vertical ,in line, Water-cooled,four-stroke cycle diesel engine Max Output Power, kw(hp)/rpm 88(120)/ 2200 Max Torque,N.m/rpm 280 Displacement,ml 3856 Emission Standard Euro 3 Transmission   Speed No.s 5 Forward and 1 Reverse Speed Max Output Torque,N.m 568 Gearshift Manual (Mechanical) Clutch ¢430 Type Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance  Axle DENA Front Axle Capacity,kg 3200 Front Axle Type Double-shoe pneumatic brake ,driving steering axle Middle&Rear Axle Capacity,kg 4290 Middle&Rear Axle Type Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle Frame 216*70*6+3mm Brakes   Service brake Brake gap can be adjusted automatically, double circulation air brake system  Assistant brake Engine exhaust brake Park brake Potential springs pressing on middle and rear wheels  Sterring  Integral Hydraulic Power Drive Side Left hand drive Steering Type Hydraulic steering with power assistance Cabin   Type Forward control, all steel welded construction,short cab, inner A/C,Radio,Cassette, tiltable Seat Nos 2 Bunk No.s 0 Wiper No.s 2 Tires 8.25R20 Tire No.s 6+1 spare tire Type Radius tires Ply, 16PR Rims 8.25R16 Rim No.s 6+1 spare tire Type All steel dicasting Electrical 12V Battery Voltage,V 12 Battery Ampere,Ah 145 Generator,V,A 28,35 Starter, Kw/24V 5.4 Fule Tank Capacity,liters 200 Front view for 2tons integrated wrecker ,the wrecker could be loaded with one unit 20GP container that could less a lot of shipping cost for the sea freight charges,finally lower your purchase cost for such wrecker truck .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .   Front 45 angle view ,light duty design for carry passenger cars.   Side view for the light duty integrated wrecker truck  TRAINING & ERECTION (if necessary): An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.    AFTER-SALE SERVICE WARRANTY: Part 1 General Description   : Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations. Part 2 “Three Guarantees” Scope : A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning. B)      Failure due to welding defect. C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control. Part 3 Non-“Three guarantees”Scope : A)      Users man-made failure lead vehicle  inadequate or incomplete B)      Users, maintenance, adjustment of the fault caused by improper C)      Users disassemble, repair leading to failure. D)     User-modified to increase their own accessories or damage caused by. E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage. Part 4 Service Mode : A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service. B)      Station personnel or commissioned directly designate a technical person to contract on-site service. Part 5 Procedures for handling procedures : A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications. B)      Who meet the "three guarantees" the scope of the repair costs borne by our company. C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.  Contact Service Headquarter : CSCTRUCK LIMITED ADD: Room 2105, Trend Centre, 29-31 Cheung Lee Street,, Chai Wan, Hong Kong. Tel:00852-2973 8324 Fax:00852-2115 9613 Email:service@csctrucks.com Contact Service Factory Works : XIAGONG CHUSHENG(HUBEI) SPECIAL PURPOSE VEHICLE MANUFACTURING CO.,LTD Add: NO.9, Jiliang Avenue, Suizhou Economic Dvpt Zone Suizhou (441300) Hubei China Tel: 0086-0722-3591500               Fax: 0086-0722-3591500 Http.//www.csctrucks.com           E-mail:info@csctrucks.com Contact Service Zambia Works : LON WORLD SPECIAL TRAILER INDUSTRY LTD  Add: Polt No: 39466.Kitwe -Ndola road. Kitwe .Zambia. Cell: 00260976981908 Contact :Tony Feng 
Chat Now

klein-ahrSkype1